RPM22.21 - App Store
You'll be able to see results in few seconds.
Publisher Description
This app is designed to work with the RPM2 insoles.
RPM2 (Remote Performance Monitoring/Measurement) allows athletes to assess bilateral deficiencies in their training. By adjusting their training to improve bilateral efficiency, athletes will become stronger and faster.
RPM2 has four different types of exercises which can be monitored. These are range of motion, force distribution, running gait, and cycling.
Each of these offers a wide range of information to help improve an athletes performance. On that note, results from exercises can be shared to your coach or personal trainer such that they can make recommendations.
If you'd like to see what all functionality RPM2 offers without first purchasing a pair of insoles, then activate the Demo version of the app through settings. This will allow you to see the kind of functionality you can expect when using the device.
Version History Fixed an issue where firmware updating would fail even when a valid version was supplied. 2.21 01/24/2017 -Added ANT+ capability to the insoles
-Use the ANT+ option from the sidebar menu and select the appropriate option for your sport
-Updated streaming to communicate properly with the updated insole firmware/hardware
-Updated the OTA firmware protocol to handle larger sizes of firmware for the new insole revisions 2.20 01/10/2017 -This version fixes an issue where calibration values set after performing the Cycling, Standing, and Running calibrations were reset after restarting the application. You should now only be required to perform the calibration once after connecting your insoles.
-Added Force calibration for Running.
-updated standing force calibration to increase sensitivity of force displacement.
-Added a processing screen when searching through running and cycling history as populating the lists can take time.
-Added an upload feature for TrainingPeaks for cycling and running. This can be done from either the cycling or running dashboard.
-Added ability to sign in/out from TrainingPeaks in the options menu under the interface tab. 2.15 04/21/2016 RPM2 has gone through a major UI (User Interface) overhaul and has much of its functionality improved or extended. Here is a short list of some of the feature changes:
- Added the ability to wirelessly upload new software to the insoles whenever a new version comes out.
- Removed the old settings menu in favor of an in-app settings.
- Flexibility, Force, and Running exercises can now be performed in real time for instantaneous feedback.
- Running now provides a metric for running power measured in Watts.
- .FIT compatibility is here, you can now upload your exercises to the provider of your choice.
- Added Symmetry scores for Flexibility and Force exercises. These allow you to objectively determine your performance.
- Calibrations for Running, Cycling, and Force exercises have their own menu.
- The new fonts and colors for text should increase readability in use with direct sunlight. 2.14 01/06/2016 Fixed an issue where shared exercise files were having their extension removed when sent. 1.82 02/11/2015 Streaming of left leg, right leg, and cumulative power have been added to RPM2 as well as cadence while cycling. These features can be accessed through the cycling exercise sprint, interval, and time trial. 1.8 01/20/2015 The following has been changed or updated in the latest update:
-[ADDED] Ability to extend distance runs out to 4 hours in the options menu
-[ADDED] Ability to extend distance cycling out to 6 hours in the options menu
-[ADDED] Display of run and cycling distance times on the exercise timer screen.
-[UPDATED] Uploading of data from insoles should now be more consistent.
-[UPDATED] Now displays an upload bar per insole rather than a single one for both.
-Other minor updates to performance. 1.71 09/26/2014 Altered the force sensing software by decreasing the m-factor and removing the calibration coefficients. This drastically increases the accuracy of pressure related exercises and reduces out of range cycling average peak power meter values. 1.7 07/27/2014 Added the ability to rename the insoles for easier discovery when connecting in a crowd of multiple RPM2 users.
Added the m-factor, a variable which takes into account force dissipation by the insole material. This increases force sensing fidelity and the accuracy of the cycling power meter. 1.6 07/07/2014 1.4 05/20/2014
About RPM2
The company that develops RPM2 is medhab llc. The latest version released by its developer is 2.21.
To install RPM2 on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-14 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the RPM2 as malware if the download link is broken.
How to install RPM2 on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the RPM2 is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After RPM2 is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 2.21
posted on 2026-10-14
Version History Fixed an issue where firmware updating would fail even when a valid version was supplied. 2.21 01/24/2017 -Added ANT+ capability to the insoles
-Use the ANT+ option from the sidebar menu and select the appropriate option for your sport
-Updated streaming to communicate properly with the updated insole firmware/hardware
-Updated the OTA firmware protocol to handle larger sizes of firmware for the new insole revisions 2.20 01/10/2017 -This version fixes an issue where calibration values set after performing the Cycling, Standing, and Running calibrations were reset after restarting the application. You should now only be required to perform the calibration once after connecting your insoles.
-Added Force calibration for Running.
-updated standing force calibration to increase sensitivity of force displacement.
-Added a processing screen when searching through running and cycling history as populating the lists can take time.
-Added an upload feature for TrainingPeaks for cycling and running. This can be done from either the cycling or running dashboard.
-Added ability to sign in/out from TrainingPeaks in the options menu under the interface tab. 2.15 04/21/2016 RPM2 has gone through a major UI (User Interface) overhaul and has much of its functionality improved or extended. Here is a short list of some of the feature changes:
- Added the ability to wirelessly upload new software to the insoles whenever a new version comes out.
- Removed the old settings menu in favor of an in-app settings.
- Flexibility, Force, and Running exercises can now be performed in real time for instantaneous feedback.
- Running now provides a metric for running power measured in Watts.
- .FIT compatibility is here, you can now upload your exercises to the provider of your choice.
- Added Symmetry scores for Flexibility and Force exercises. These allow you to objectively determine your performance.
- Calibrations for Running, Cycling, and Force exercises have their own menu.
- The new fonts and colors for text should increase readability in use with direct sunlight. 2.14 01/06/2016 Fixed an issue where shared exercise files were having their extension removed when sent. 1.82 02/11/2015 Streaming of left leg, right leg, and cumulative power have been added to RPM2 as well as cadence while cycling. These features can be accessed through the cycling exercise sprint, interval, and time trial. 1.8 01/20/2015 The following has been changed or updated in the latest update:
-[ADDED] Ability to extend distance runs out to 4 hours in the options menu
-[ADDED] Ability to extend distance cycling out to 6 hours in the options menu
-[ADDED] Display of run and cycling distance times on the exercise timer screen.
-[UPDATED] Uploading of data from insoles should now be more consistent.
-[UPDATED] Now displays an upload bar per insole rather than a single one for both.
-Other minor updates to performance. 1.71 09/26/2014 Altered the force sensing software by decreasing the m-factor and removing the calibration coefficients. This drastically increases the accuracy of pressure related exercises and reduces out of range cycling average peak power meter values. 1.7 07/27/2014 Added the ability to rename the insoles for easier discovery when connecting in a crowd of multiple RPM2 users.
Added the m-factor, a variable which takes into account force dissipation by the insole material. This increases force sensing fidelity and the accuracy of the cycling power meter. 1.6 07/07/2014 1.4 05/20/2014
version 2.21
posted on 2026-09-04
Version History This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.
Fixed an issue where firmware updating would fail even when a valid version was supplied. 2.21 01/24/2017 -Added ANT+ capability to the insoles
-Use the ANT+ option from the sidebar menu and select the appropriate option for your sport
-Updated streaming to communicate properly with the updated insole firmware/hardware
-Updated the OTA firmware protocol to handle larger sizes of firmware for the new insole revisions 2.20 01/10/2017 -This version fixes an issue where calibration values set after performing the Cycling, Standing, and Running calibrations were reset after restarting the application. You should now only be required to perform the calibration once after connecting your insoles.
-Added Force calibration for Running.
-updated standing force calibration to increase sensitivity of force displacement.
-Added a processing screen when searching through running and cycling history as populating the lists can take time.
-Added an upload feature for TrainingPeaks for cycling and running. This can be done from either the cycling or running dashboard.
-Added ability to sign in/out from TrainingPeaks in the options menu under the interface tab. 2.15 04/21/2016 RPM2 has gone through a major UI (User Interface) overhaul and has much of its functionality improved or extended. Here is a short list of some of the feature changes:
- Added the ability to wirelessly upload new software to the insoles whenever a new version comes out.
- Removed the old settings menu in favor of an in-app settings.
- Flexibility, Force, and Running exercises can now be performed in real time for instantaneous feedback.
- Running now provides a metric for running power measured in Watts.
- .FIT compatibility is here, you can now upload your exercises to the provider of your choice.
- Added Symmetry scores for Flexibility and Force exercises. These allow you to objectively determine your performance.
- Calibrations for Running, Cycling, and Force exercises have their own menu.
- The new fonts and colors for text should increase readability in use with direct sunlight. 2.14 01/06/2016 Fixed an issue where shared exercise files were having their extension removed when sent. 1.82 02/11/2015 Streaming of left leg, right leg, and cumulative power have been added to RPM2 as well as cadence while cycling. These features can be accessed through the cycling exercise sprint, interval, and time trial. 1.8 01/20/2015 The following has been changed or updated in the latest update:
-[ADDED] Ability to extend distance runs out to 4 hours in the options menu
-[ADDED] Ability to extend distance cycling out to 6 hours in the options menu
-[ADDED] Display of run and cycling distance times on the exercise timer screen.
-[UPDATED] Uploading of data from insoles should now be more consistent.
-[UPDATED] Now displays an upload bar per insole rather than a single one for both.
-Other minor updates to performance. 1.71 09/26/2014 Altered the force sensing software by decreasing the m-factor and removing the calibration coefficients. This drastically increases the accuracy of pressure related exercises and reduces out of range cycling average peak power meter values. 1.7 07/27/2014 Added the ability to rename the insoles for easier discovery when connecting in a crowd of multiple RPM2 users.
Added the m-factor, a variable which takes into account force dissipation by the insole material. This increases force sensing fidelity and the accuracy of the cycling power meter. 1.6 07/07/2014 1.4 05/20/2014
version 2.21
posted on 2026-08-23
Version History This update from Apple will improve the functionality of this app. No new features are included.
Fixed an issue where firmware updating would fail even when a valid version was supplied. 2.21 01/24/2017 -Added ANT+ capability to the insoles
-Use the ANT+ option from the sidebar menu and select the appropriate option for your sport
-Updated streaming to communicate properly with the updated insole firmware/hardware
-Updated the OTA firmware protocol to handle larger sizes of firmware for the new insole revisions 2.20 01/10/2017 -This version fixes an issue where calibration values set after performing the Cycling, Standing, and Running calibrations were reset after restarting the application. You should now only be required to perform the calibration once after connecting your insoles.
-Added Force calibration for Running.
-updated standing force calibration to increase sensitivity of force displacement.
-Added a processing screen when searching through running and cycling history as populating the lists can take time.
-Added an upload feature for TrainingPeaks for cycling and running. This can be done from either the cycling or running dashboard.
-Added ability to sign in/out from TrainingPeaks in the options menu under the interface tab. 2.15 04/21/2016 RPM2 has gone through a major UI (User Interface) overhaul and has much of its functionality improved or extended. Here is a short list of some of the feature changes:
- Added the ability to wirelessly upload new software to the insoles whenever a new version comes out.
- Removed the old settings menu in favor of an in-app settings.
- Flexibility, Force, and Running exercises can now be performed in real time for instantaneous feedback.
- Running now provides a metric for running power measured in Watts.
- .FIT compatibility is here, you can now upload your exercises to the provider of your choice.
- Added Symmetry scores for Flexibility and Force exercises. These allow you to objectively determine your performance.
- Calibrations for Running, Cycling, and Force exercises have their own menu.
- The new fonts and colors for text should increase readability in use with direct sunlight. 2.14 01/06/2016 Fixed an issue where shared exercise files were having their extension removed when sent. 1.82 02/11/2015 Streaming of left leg, right leg, and cumulative power have been added to RPM2 as well as cadence while cycling. These features can be accessed through the cycling exercise sprint, interval, and time trial. 1.8 01/20/2015 The following has been changed or updated in the latest update:
-[ADDED] Ability to extend distance runs out to 4 hours in the options menu
-[ADDED] Ability to extend distance cycling out to 6 hours in the options menu
-[ADDED] Display of run and cycling distance times on the exercise timer screen.
-[UPDATED] Uploading of data from insoles should now be more consistent.
-[UPDATED] Now displays an upload bar per insole rather than a single one for both.
-Other minor updates to performance. 1.71 09/26/2014 Altered the force sensing software by decreasing the m-factor and removing the calibration coefficients. This drastically increases the accuracy of pressure related exercises and reduces out of range cycling average peak power meter values. 1.7 07/27/2014 Added the ability to rename the insoles for easier discovery when connecting in a crowd of multiple RPM2 users.
Added the m-factor, a variable which takes into account force dissipation by the insole material. This increases force sensing fidelity and the accuracy of the cycling power meter. 1.6 07/07/2014 1.4 05/20/2014
version 2.21
posted on 2017-01-24
This app has been updated by Apple to display the Apple Watch app icon.
Fixed an issue where firmware updating would fail even when a valid version was supplied.
version 2.21
posted on 2017-01-24
Jan 24, 2017 Version 2.21
This app has been updated by Apple to display the Apple Watch app icon.
Fixed an issue where firmware updating would fail even when a valid version was supplied.
version 2.21
posted on 2017-01-24
Jan 24, 2017 Version 2.21
Fixed an issue where firmware updating would fail even when a valid version was supplied.
version 2.21
posted on 2017-01-24
Jan 24, 2017 Version 2.21
This app has been updated by Apple to use the latest Apple signing certificate.
Fixed an issue where firmware updating would fail even when a valid version was supplied.
version 2.15
posted on 2014-05-20
version 2.21
posted on 1970-01-01
24 янв. 2017 г. Version 2.21
Fixed an issue where firmware updating would fail even when a valid version was supplied.
version 2.21
posted on 1970-01-01
2017年1月24日 Version 2.21
Fixed an issue where firmware updating would fail even when a valid version was supplied.
Disclaimer
Official App Store Link
We do not host RPM2 on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for RPM2 is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
